In the realm of air conditioning maintenance, there exists a plethora of prevailing myths that often cloud the judgment of homeowners and leave their A/C units neglected. In this informative article, we will unveil the truth behind these misconceptions and debunk the most common A/C maintenance myths. By shedding light on these falsehoods, you will gain valuable insights that will enable you to make informed decisions about the care and upkeep of your A/C system, ensuring its optimal performance and longevity.
Myth: Turning off the A/C at home will save energy
Fact: Why consistent temperature regulation can be more efficient
One common myth surrounding air conditioning (A/C) is the belief that turning off the system when you leave home will save energy and result in significant cost savings. However, the reality is that consistent temperature regulation can actually be more efficient in the long run.
When you turn off the A/C completely, the temperature inside your home can rise significantly, especially on hot summer days. This means that when you return and turn the A/C back on, it has to work harder and consume more energy to bring the temperature back down to a comfortable level. The energy required to cool the home from a heightened temperature can often exceed the energy saved from turning off the A/C.
By maintaining a consistent temperature while you are away, the A/C system can work more steadily and efficiently. This consistent operation allows the system to maintain a comfortable temperature without the need for excessive bursts of cooling when you return. In turn, this leads to better energy efficiency, reduces strain on the A/C unit, and ultimately results in potential energy and cost savings over time.
Understanding the energy requirements for cooling an entire home
To better appreciate the inefficiency of frequently turning off the A/C, it is essential to understand the energy requirements for cooling an entire home. Cooling a house from a high temperature to a comfortable level requires a significant amount of energy, especially if the temperature differential is large.
A typical air conditioning unit cycles the refrigerant, which absorbs heat from the indoor air and releases it outside. When the temperature inside your home rises, the A/C unit has to remove a larger amount of heat to achieve a desired indoor temperature. This process consumes more energy and can strain the air conditioning system.
By keeping the A/C at a consistent temperature setting, the unit operates more efficiently as it only needs to maintain the desired temperature rather than cooling the entire house from a higher temperature. This allows the system to run at a more optimal level, leading to energy savings and prolonging the lifespan of the A/C unit.
Effect on the Lifespan of the Air Conditioning unit
Frequently turning off the A/C and then turning it on again can have a detrimental impact on the lifespan of the unit. The repeated on-off cycles place additional strain on the compressor, which is a vital component of the A/C system.
When the A/C is turned off, the compressor is subjected to periods of inactivity and then sudden high-demand operation when the A/C is switched back on. These frequent on-off cycles can cause unnecessary wear and tear on the compressor, potentially leading to premature failure and the need for costly repairs or even A/C replacement.
To ensure the longevity of your air conditioning unit, it is recommended to maintain a consistent temperature setting rather than constantly turning it off and on. By doing so, you can optimize energy efficiency, reduce strain on the system components, and ultimately extend the lifespan of your A/C unit.
Myth: Lowering the thermostat will cool your home faster
Fact: Cooling efficiency remains constant, irrespective of temperature setting
It is a commonly held belief that lowering the thermostat to a significantly lower temperature will cool your home faster. However, the fact is that the cooling efficiency of an air conditioning unit remains constant, irrespective of the temperature setting.
The ability of the A/C system to cool the air is determined by its cooling capacity, commonly measured in BTUs (British Thermal Units). The BTU rating indicates the amount of heat the A/C unit can remove from the air within a given time. Lowering the thermostat does not increase the cooling capacity or the rate at which the A/C can cool the air.
In reality, when you lower the thermostat, the A/C simply runs for a longer period of time to reach the desired temperature. This extended runtime does not expedite the cooling process, but rather prolongs it. Consequently, setting the thermostat to an extremely low temperature with the intention of cooling your home faster not only wastes energy but can also put unnecessary strain on the A/C unit.
Pressure on the system due to drastic temperature drops
Another reason why lowering the thermostat does not cool your home faster is the pressure it puts on the A/C system. Rapid and excessive temperature drops can cause the evaporator coil to freeze up due to inadequate heat exchange.
The evaporator coil is responsible for absorbing heat from the indoor air as the refrigerant circulates through it. When the thermostat is set too low, the A/C unit operates for prolonged periods, causing the evaporator coil to become colder and frost over. This ice buildup restricts the flow of air and reduces the A/C’s cooling efficiency.
To maintain optimal cooling efficiency and prevent damage to the evaporator coil, it is recommended to set the thermostat at a moderate temperature that allows the A/C unit to operate steadily without excessive strain or risk of frost formation.
Role of A/C in humidity control
One important aspect of air conditioning is its role in humidity control. A properly functioning A/C unit not only cools the air but also removes excess humidity, creating a more comfortable and healthier indoor environment.
When you lower the thermostat to a cooler temperature, the A/C unit operates for longer periods, which allows it to dehumidify the air more effectively. However, it is important to note that the rate at which the A/C removes humidity remains constant, irrespective of the temperature setting.
Therefore, lowering the thermostat does not necessarily increase the dehumidification rate. If humidity control is a priority, it is advisable to set the thermostat at a moderate temperature that strikes a balance between cooling and dehumidification. This ensures optimal comfort, energy efficiency, and longevity of the A/C system.
Myth: Air conditioning units don’t need regular maintenance
Fact: The importance of regular checks for optimum performance
One common misconception about air conditioning units is that they do not require regular maintenance. However, the fact is that regular maintenance is crucial for ensuring the optimum performance, energy efficiency, and longevity of your A/C system.
Regular maintenance checks by a professional A/C technician help identify and address potential issues before they escalate into major problems. These maintenance checks include inspecting and cleaning various components of the A/C system, lubricating moving parts, checking refrigerant levels, and ensuring proper airflow.
By neglecting regular maintenance, you risk compromising the performance and efficiency of your air conditioning unit. Dust and debris can accumulate on the filters and coils, reducing airflow and forcing the A/C to work harder to cool the air. This not only decreases cooling efficiency but also increases energy consumption and utility costs.
Impact of neglecting maintenance on the system’s efficiency and lifespan
Neglecting regular maintenance can have a significant impact on the efficiency and lifespan of your A/C unit. When dust and debris accumulate on the filters and coils, the A/C system’s ability to remove heat from the air is compromised. This leads to reduced cooling efficiency and increased strain on the components of the system.
The increased strain on the A/C components can result in premature wear and tear, reducing the lifespan of the unit. Additionally, neglected maintenance can lead to refrigerant leaks, which not only decrease cooling performance but can also cause irreversible damage to the system if left unaddressed.
Regular maintenance, on the other hand, ensures that your A/C unit operates at optimal efficiency, helping you save on energy costs and extending the lifespan of the system. It also allows for the early detection and resolution of any potential issues, preventing costly repairs down the line.
Types of routine maintenance checks that can prolong the life of the A/C unit
To prolong the life of your air conditioning unit and ensure its optimum performance, several routine maintenance checks need to be performed regularly. These checks can be carried out by a professional A/C technician to ensure proper and thorough inspection.
Some essential routine maintenance checks include:
-
Cleaning or replacing air filters: Dirty filters restrict airflow, reduce cooling efficiency, and strain the A/C system. Regularly cleaning or replacing the air filters ensures adequate airflow and optimal cooling performance.
-
Checking and cleaning the evaporator and condenser coils: Over time, these coils can accumulate dust and debris, hindering heat exchange and reducing cooling efficiency. Regular cleaning helps maintain their effectiveness.
-
Inspecting and cleaning the condensate drain line: A clogged drain line can lead to water leakage and subsequent damage to the A/C system. Regular inspection and cleaning prevent potential issues.
-
Checking refrigerant levels: The refrigerant is a crucial component of the A/C system, and improper levels can affect cooling performance. Regular checks ensure optimal refrigerant levels and prevent leaks.
-
Lubricating moving parts: Proper lubrication reduces friction and wear on moving parts, enhancing the efficiency and lifespan of the A/C unit.
By consistently performing these routine maintenance checks, you can ensure that your A/C unit operates at its best, maximizing energy efficiency, and prolonging the life of the system.
Myth: A/C refrigerant needs to be topped off regularly
Fact: A/C refrigerant is designed to last the unit’s lifetime
There is a common misconception that A/C refrigerant needs to be regularly topped off or refilled. The fact is that A/C refrigerant is designed to last the lifetime of the unit under normal operating conditions. If your A/C system requires frequent refrigerant refills, it indicates a problem that needs to be addressed.
Refrigerant is responsible for absorbing heat from the indoor air, cooling it, and then releasing the heat outside. It does not get consumed or evaporate over time. Therefore, if your A/C system is low on refrigerant, it is likely due to a leak in the system.
Refrigerant leaks can occur in various components of the A/C system, such as the coils, connections, or valves. These leaks not only compromise the cooling performance of the system but can also cause irreversible damage if not addressed promptly.
Risks associated with overfilling the refrigerant
While it is important to address low refrigerant levels caused by leaks, it is equally crucial to avoid overfilling the refrigerant. Overfilling can lead to a range of issues, including reduced cooling efficiency, increased strain on the A/C components, and potential damage to the compressor.
The A/C system is designed to operate optimally with a specific refrigerant charge level. Exceeding this level can disrupt the balance of the system, affecting cooling performance and putting unnecessary strain on the compressor.
To ensure the refrigerant charge is at the correct level, it is advisable to consult a professional A/C technician. They have the knowledge and experience to accurately assess the refrigerant levels, identify any leaks, and perform the necessary repairs or replacements to restore the system’s functionality.
Signs of refrigerant leaks and actions to take
Refrigerant leaks can have a detrimental effect on the performance and efficiency of your A/C unit. Being aware of the signs of refrigerant leaks can help you take timely action and prevent further damage to the system.
Some common signs of refrigerant leaks include:
-
Reduced cooling performance: If you notice that your A/C is not providing the same level of cooling as before, it may be a sign of low refrigerant caused by a leak.
-
Hissing or bubbling sounds: If you hear hissing or bubbling sounds coming from your A/C system, it can indicate a refrigerant leak.
-
Ice buildup: Excessive ice formation on the evaporator coil is often a sign of low refrigerant levels caused by a leak.
If you suspect a refrigerant leak, it is essential to contact a professional A/C technician to inspect and repair the system. They have the expertise to identify and fix the leaks, ensuring optimal cooling performance and preventing further damage to the A/C unit.
Myth: Bigger A/C units are always better
Fact: Importance of matching the A/C unit size with room size
The notion that bigger A/C units are always better is a myth that can lead to various problems and inefficiencies. The truth is that it is crucial to match the size of the A/C unit to the size of the room or space it is intended to cool.
An A/C unit that is too large for the room can lead to short cycling, a condition where the A/C system cools the space too quickly and shuts off prematurely. This rapid cooling does not allow sufficient time for the A/C unit to dehumidify the air effectively, leading to a damp and uncomfortable indoor environment.
On the other hand, an A/C unit that is too small for the room will struggle to cool the space adequately, resulting in insufficient cooling and increased energy consumption as the A/C system works harder to maintain the desired temperature.
To ensure maximum comfort and energy efficiency, it is essential to consult with a professional A/C technician who can determine the appropriate A/C unit size based on the specific requirements and dimensions of the space.
Problems caused by oversized A/C units
Installing an oversized A/C unit can lead to several problems and inefficiencies. Here are some of the issues that can arise from using a unit that is too big for your space:
-
Short cycling: As mentioned earlier, an oversized A/C unit will cool the space quickly, resulting in frequent on-off cycling. This short cycling can strain the compressor, reduce energy efficiency, and decrease the lifespan of the A/C unit.
-
Inadequate dehumidification: A unit that is too large for the space will not have sufficient runtime to effectively dehumidify the air. High humidity levels can lead to mold growth, discomfort, and poor indoor air quality.
-
Uneven cooling: Oversized A/C units may cool certain areas of a room more effectively, causing uneven cooling and temperature imbalances throughout the space.
Installing the right-sized A/C unit ensures efficient and balanced cooling, optimal dehumidification, and energy savings by avoiding unnecessary strain on the system.
Understanding BTUs and the right unit size for your home
When selecting an A/C unit, it is important to understand the concept of BTUs (British Thermal Units). BTUs refer to the cooling capacity of an A/C system and indicate the amount of heat the unit can remove from the air within a given time.
To determine the appropriate BTU rating for your space, several factors need to be considered, including the room’s size, insulation, ceiling height, and climate zone. A professional A/C technician can perform a load calculation to determine the correct BTU rating for your specific needs.
Choosing the right-sized A/C unit based on the calculated BTU rating ensures optimal cooling performance, energy efficiency, and avoids the problems associated with an oversized or undersized unit.
Myth: You don’t need to change the filter often
Fact: Influence of a clean filter on the air quality and A/C efficiency
Another prevailing myth is that air filters in A/C units don’t need to be changed often. However, the fact is that regularly changing the air filter is essential for maintaining good air quality, maximizing A/C efficiency, and preventing potential issues.
The air filter in an A/C unit plays a crucial role in trapping dust, pollen, pet dander, and other airborne particles. Over time, these particles accumulate on the filter, causing it to become clogged and obstructing airflow. When the filter is clogged, the A/C system has to work harder to draw in air, leading to reduced efficiency and increased energy consumption.
Furthermore, a dirty air filter can affect the air quality in your home. Allergens, dust, and other particles that would normally be trapped by a clean filter can bypass a clogged filter and circulate back into the indoor air, potentially causing respiratory issues and allergies.
Recommended timeline for changing filters
The frequency at which you should change the air filter in your A/C unit depends on several factors, including the type of filter, the level of airborne contaminants, and the usage of the A/C system. However, as a general guideline, it is recommended to check the filter every 30 days and change it when necessary.
In homes with pets or in areas with high levels of dust and allergens, the filter may need to be changed more frequently to ensure optimal air quality and A/C efficiency. Conversely, in homes with minimal dust and low levels of airborne particles, the filter may last longer before needing replacement.
It is important to consult the manufacturer’s instructions or seek advice from a professional A/C technician to determine the appropriate filter changing schedule based on your specific circumstances.
Health implications of a dirty air filter
Neglecting to change the air filter regularly can have various health implications. A dirty air filter can contribute to poor indoor air quality, which can affect respiratory health and potentially exacerbate existing allergies or asthma.
When the filter is clogged, it cannot effectively trap harmful particles, allowing them to recirculate in the air you breathe. This can lead to increased exposure to allergens, dust mites, pollen, and other irritants, triggering allergic reactions, respiratory discomfort, and worsened symptoms for those with existing respiratory conditions.
To maintain good air quality and promote better respiratory health, it is imperative to regularly change the air filter in your A/C unit. Doing so helps ensure that the air circulating in your home is clean, fresh, and free from harmful particles.
This image is property of images.ctfassets.net.
Myth: A/C units only cool the air
Fact: A/C units also dehumidify and clean the air
Contrary to the myth that A/C units only cool the air, they actually provide additional benefits beyond temperature regulation. A properly functioning A/C system also dehumidifies and cleans the air, contributing to a healthier and more comfortable indoor environment.
Humidity control is an important aspect of air conditioning. When warm air passes over the evaporator coil, moisture condenses on the cold coil, effectively dehumidifying the air. This is why you may notice a decrease in humidity levels when your A/C is running.
Reducing excess moisture in the air not only creates a more pleasant environment but also helps prevent mold and mildew growth. High humidity levels can promote the growth of these harmful substances, which can lead to respiratory issues and poor indoor air quality.
In addition to dehumidification, A/C units also help clean the air by filtering out dust, pollen, pet dander, and other airborne particles. The air filter within the A/C system traps these contaminants, preventing them from circulating in your home and potentially causing allergies and respiratory problems.
By understanding the additional benefits provided by A/C units, you can make informed decisions about maintaining and utilizing your system to promote a healthier indoor environment.
Importance of dehumidification in cooling process
Dehumidification plays a significant role in the cooling process. When the A/C unit removes heat from the indoor air, it also removes moisture, resulting in drier and more comfortable air.
Excess humidity in the air can make a room feel uncomfortable and stuffy, even if the temperature is set to a desirable level. The A/C’s dehumidification process helps alleviate this discomfort by reducing moisture levels and creating a more pleasant environment.
Moreover, dehumidification plays a crucial role in preventing mold growth. Mold thrives in moist environments, and by effectively dehumidifying the air, the A/C unit helps maintain a humidity level that discourages mold and mildew formation.
The proper balance between cooling and dehumidification is essential for optimal comfort, energy efficiency, and overall air quality in your home. Ensuring that your A/C system is functioning well and that the dehumidification process is balanced with cooling can enhance your indoor environment.
How A/C units contribute to indoor air quality
Indoor air quality is a critical factor in maintaining a healthy and comfortable living space. A/C units play a vital role in improving indoor air quality by filtering out airborne impurities and preventing their circulation throughout your home.
The air filter within the A/C system captures and traps dust, dirt, pollen, pet dander, and other particles, preventing them from entering the indoor air you breathe. This filtration process helps reduce allergies, respiratory issues, and overall discomfort caused by airborne contaminants.
Regularly cleaning or changing the air filter ensures that the A/C unit continues to effectively clean the air and maintain good indoor air quality. It is recommended to follow the manufacturer’s guidelines and consult with a professional A/C technician to establish an appropriate filter maintenance schedule based on your specific household needs.
By understanding the importance of clean indoor air and utilizing the filtration capabilities of your A/C unit, you can create a healthier and more comfortable living environment for yourself and your family.
Myth: Air conditioners cause colds
Fact: Understanding the relationship between A/C and colds
The belief that air conditioners cause colds is a common myth. However, the fact is that air conditioners themselves do not directly cause colds or other respiratory illnesses.
Colds are caused by viruses that are typically spread through droplets when an infected person coughs, sneezes, or talks. These droplets contain the virus and can be transmitted to others who come into contact with them. Simply being in an air-conditioned environment does not increase the likelihood of catching a cold unless an infected individual is present and actively spreading the virus.
In fact, properly functioning and well-maintained air conditioners can contribute to reducing the spread of viruses and other airborne contaminants. The filtration capabilities of A/C units can help capture and trap particles, including viruses, reducing their presence in the indoor air you breathe.
How A/C helps in controlling the spread of allergens
Allergens, such as pollen, dust mites, and pet dander, can trigger allergies and respiratory discomfort. Air conditioners can aid in controlling the spread of these allergens, promoting a healthier indoor environment for individuals sensitive to allergens.
The air filter within the A/C system plays a crucial role in capturing and trapping allergens, preventing them from circulating in the indoor air. However, to maximize the allergen reduction capabilities of your A/C unit, it is important to regularly clean or replace the air filter as per the manufacturer’s recommendations.
Additionally, maintaining proper humidity levels in your home with the help of your air conditioner can further control the growth and proliferation of mold, another common allergen. Regular A/C maintenance, including cleaning the evaporator coil and drain line, can help prevent mold growth and ensure a healthier indoor environment for allergy sufferers.
By understanding the relationship between A/C units and the spread of allergens, you can make informed decisions to minimize allergen exposure and promote respiratory health.
Importance of maintaining the right indoor temperature and humidity levels
Maintaining the right indoor temperature and humidity levels is essential for creating a comfortable and healthy living environment. A/C units play a significant role in achieving and maintaining these optimal conditions.
Extreme temperatures and high humidity levels can contribute to discomfort and increased risk of health issues. When it is too hot, the body has to work harder to cool itself, leading to dehydration, fatigue, and potential heat-related illnesses. Conversely, high humidity can result in a clammy feeling, promote the growth of mold and mildew, and cause respiratory discomfort.
A properly functioning A/C unit helps regulate the indoor temperature, providing a comfortable and consistent environment that promotes overall well-being. In addition, the dehumidification capabilities of the A/C unit ensure that humidity levels are balanced, preventing excess moisture and creating a healthier indoor environment.
By maintaining the right indoor temperature and humidity levels with the help of your A/C unit, you can enhance comfort, reduce the risk of heat-related illnesses, and minimize the growth of allergens and other harmful substances.
This image is property of aaaheatingandcoolinginc.com.
Myth: Fans can replace or work as efficiently as an air conditioner
Fact: Differences in how fans and air conditioners work
Fans and air conditioners serve different purposes and work in different ways. While fans can provide a cooling sensation, they cannot replace or work as efficiently as an air conditioner in terms of temperature regulation and dehumidification.
Fans work by creating airflow, which can help evaporate sweat from the skin and provide a cooling effect. However, they do not actually cool the air. Fans circulate the existing air in a room, providing a breeze that can make you feel cooler by increasing the rate of evaporation from your skin.
On the other hand, air conditioners actively cool and dehumidify the air. A properly functioning A/C system removes heat and moisture from the indoor air, resulting in a reduced temperature and lower humidity levels. This creates a more comfortable and healthier indoor environment, which cannot be achieved by fans alone.
Limitations of fans in managing indoor temperature
While fans can provide temporary relief from the heat by creating a cooling breeze, they have limitations when it comes to managing indoor temperature. Fans do not actually lower the temperature of the air, but rather create a perceived cooling effect on your skin.
In hot and humid climates, relying solely on fans may not be sufficient in providing optimal comfort. High humidity levels can make the air feel stifling and uncomfortable, even with the use of fans. Air conditioners, with their cooling and dehumidification capabilities, are better equipped to effectively manage indoor temperature and create a comfortable environment.
Additionally, fans are ineffective in cooling large spaces or multiple rooms simultaneously. Air conditioners, on the other hand, can cool an entire home or specific zones using a centralized system or individual units, ensuring consistent comfort throughout the indoor space.
Appropriate use of fans in conjunction with A/C units
While fans cannot replace air conditioners in terms of temperature regulation, they can complement the use of A/C units to enhance comfort and energy efficiency. When used in conjunction with air conditioning, fans can help distribute cool air more effectively, reducing the workload on the A/C system.
Strategically placing fans in rooms can help circulate the cool air from the A/C unit, allowing it to reach all areas of the room more efficiently. This can result in a more balanced indoor temperature and reduce the need for excessive A/C usage.
Additionally, using fans in combination with air conditioning allows you to set the thermostat at a slightly higher temperature, saving energy and potentially reducing utility costs while still maintaining comfort.
By understanding the differences and benefits of fans and air conditioners, you can optimize their use to create a comfortable and energy-efficient indoor environment.
Myth: DIY A/C maintenance is as effective as a professional’s work
Fact: Need for professional knowledge and experience
While it may be tempting to attempt DIY maintenance on your A/C system, the fact is that professional knowledge and experience are essential for ensuring effective and reliable A/C maintenance.
A/C systems are complex and consist of various components that require specialized knowledge for proper maintenance and repairs. A professional A/C technician has undergone training and has the expertise to diagnose problems, perform necessary maintenance tasks, and address any issues effectively.
Attempting DIY maintenance without the proper knowledge and experience can lead to costly mistakes, ineffective repairs, and even further damage to the A/C system. It is crucial to recognize the limitations of your own skills and seek professional assistance when it comes to A/C maintenance.
Risks of a DIY approach to A/C maintenance
Taking a DIY approach to A/C maintenance without the necessary expertise can have several risks and drawbacks. Some of the potential risks include:
-
Ineffective repairs: A/C systems require specific tools and knowledge to diagnose and address issues accurately. Without the right expertise, DIY repairs may not resolve the underlying problem or may create additional issues.
-
Safety hazards: Working with electrical components and refrigerants in A/C systems can be hazardous if not done correctly. Professional A/C technicians have the necessary training and expertise to handle these potentially dangerous situations safely.
-
Voiding warranties: Attempting DIY repairs or maintenance without professional guidance may void the warranty of your A/C system. Manufacturers often require professional installation, maintenance, and repairs to maintain the warranty coverage.
To ensure the safety, reliability, and longevity of your A/C system, it is recommended to rely on the expertise of professional A/C technicians. They have the knowledge and experience to perform effective maintenance, repairs, and installations, ensuring optimal performance and peace of mind.
Cost-effectiveness of professional A/C maintenance
While DIY maintenance may seem cost-effective initially, it can actually end up being more expensive in the long run. Professional A/C maintenance provides several cost-saving benefits that outweigh the upfront investment.
Regular professional maintenance helps identify and address potential issues before they escalate into major problems. By detecting problems early, you can avoid costly repairs or system failures down the line. Additionally, professional maintenance helps optimize the energy efficiency of your A/C system, resulting in lower utility bills and long-term cost savings.
Furthermore, professional A/C technicians have access to specialized tools and equipment that may not be readily available to homeowners. This allows them to perform maintenance tasks more effectively and accurately, ultimately saving you time, effort, and the risk of further damage caused by insufficient DIY methods.
To benefit from comprehensive maintenance, cost savings, and peace of mind, it is prudent to invest in professional A/C maintenance and rely on the expertise of qualified technicians.
In conclusion, debunking common myths surrounding A/C maintenance is essential for maximizing the efficiency, longevity, and performance of your air conditioning system. Understanding the facts behind these myths helps you make informed decisions about the proper use, maintenance, and care of your A/C unit. By utilizing professional guidance and regularly maintaining your A/C system, you can ensure optimal comfort, energy efficiency, and a healthier indoor environment.
This image is property of www.ernstheating.com.